Senner Tuning Creates A White Beast Out Of The Audi S5

Senner Tuning has created a brand new body kit for the Audi S5. The German tuner has modified the exterior of the V8 FSI coupe as they added a new front spoiler, new front grille, a rear spoiler lip and a rear carbon-fibre apron. There are four exhaust pipes which end off the look with a massive groan.

The 4.2-litre V8 S5 has been called the White Beast and it will have 282kW with 472Nm of torque, which amounts to a modest 22kW upgrade. There will be a performance air filter and sports exhaust system for this upgrade.

The White Beast will sit 40mm lower to the ground, and it will run on a set of 21-inch light alloy diamond black wheels.

Inside of the modified Audi you’ll find carbon fibre finishes.

Pricing starts at €18,990.

 

Press Release

White beast – by Senner Tuning AG

The German art of tuning: a worthy example is the new S5 that had taken the form of a truly individual “sports car” in the hands of Senner Tuning AG tuners from Ingelheim. Apart from the decent design kit, Senner Tuning still has various upgrades ready to apply on the S5 series.

A front spoiler, stretched deeply below, with a large air inlet in RS5 Look with a well-suited radiator grill, designed in the form of cells, contributes to the perfect car body along the sliding air streams and optics. Additionally, we can find a rear spoiler lip at the body, as well as a rear apron unit performed in Carbon Look by Rieger tuning house. To make the appearance complete, the car is equipped with modern LED back lights, and a number-plate light has light-emitting diodes in clear white, too.

But this is still not enough. As the name “white beast” implies, not only the optics but also the engine power have been upgraded. With parametric surface optimization, performance air filter plug-in package and exhaust system, additional 30 ph and 35 Nm are now available for Audi S5, and the overall power now makes 384 ph and 475 Nm.

Furthermore, the speed limitation of 250 km/h was raised, so now the car can reach the full 285 km/h. The acceleration up to this speed was boosted by the Power Converter, an electronic module of acceleration of the signal from the gas pedal.

The corresponding sound of the newly acquired power is produced by the Senner Tuning exhaust system which emphasizes the car’s sport-style appearance optically, too, with its four exhaust pipes of high-grade steel. The exhaust system includes a sport exhaust silencer and an X-pipe and is provided with an EU grant for vehicle operating.

To make the performance of the reinforced motor core optimal for the street and allow no losses, the craftsmen from Senner Tuning use lowered suspension springs with 40-mm suspension at the front axle and 35-mm suspension at the rear axle which also create a nice-looking aspect between the body and the rims.

In addition, giant and two-parted 21-inch polished light alloy wheel rims Work Varianza T1S in diamond black, that were produced exclusively for Senner Tuning, find their application with the white beast. High-performance tyres by Hankook with an S1 Evo label, as big as 255/30 R21 and 295/25 R21, were installed on 9×21″ and 10,5×21″ rims. And there is no need to adjust the wheel arch edges!

The interior has also undergone some changes. A carbon fiber interior package, including the tachometer display screen, sticks out from the rest. There is also a fancy foot mat of high-quality velour – this is where sport ambitions merge with individuality.

The cost of the whole renovation kit is 18,990 Euro including technical inspection fees!